Cookie Use Policy and Affiliate Link Info
This site uses cookies and continued use of the site acknowledges your acceptance of this policy. For details, visit the Classic Cars Online US About Page.
As an FYI: Affiliate links are used in several places around the site as part of the site’s advertising efforts, and while ads are what keeps our ‘doors open’, clicking the links does not in any way impact the cost of items you might purchase from advertisers.
Choosing the Right Aftermarket Springs for your Car
by: Miroslav Ovcharik
Springs, together with anti-roll bars, have a significant effect on the feel of a car and its responsiveness to steering input. Increasing spring rate at a particular corner of the car transfers more weight to that corner making it slide more. Hence, if your car is understeering, you can either decrease front spring rate or increase rear spring rate to correct the condition. You can increase front spring rate and decrease rear spring rate to correct oversteer.
Installing lowering springs on your car can provide a substantial improvement in handling. The center of gravity of the car will be lower, which will allow the four tires to stay more evenly planted to the ground. Lowering a car is more involved than just installing shorter springs. It is usually necessary to readjust the camber on the front and possible the rear suspension since it will change when the car is lowered. Generally, a car should have a full alignment after lowering the suspension. Although lowering a car will usually improve handling, lowering it too much will not allow for enough suspension travel, or stroke. The car may bottom out on the suspension (suspension reaches full travel) or the chassis may actually hit the ground, leading to loss of traction and possible damage to the underside of your car.
When lowering a car, you must consider what type of driving conditions the car will see and what spring rates are appropriate for you. If you significantly lower the car, you will need stiff springs to limit the suspension travel and prevent bottoming out. Also, if you plan to race on bumpy surfaces or do mostly street driving, I recommend avoiding a suspension setup with very small travel. You need a fair amount of suspension travel to absorb bumps. If you make your suspension too stiff because you have very little suspension travel, then small bumps will tend to lift the wheels off the ground instead of being absorbed by the suspension. If the car bottoms out, it will experience a sudden loss in traction that can easily lead to a spinout or crash. Therefore, on bumpy tracks, use softer springs and greater ride height to improve handling and avoid bottoming out.
Visit my website for more information about spring adjustments: www.240edge.com
About The Author
Miroslav Ovcharik I have been an automotive enthusiast throughout my life and have participated successfully in various amateur racing series. I specialize in tuning the Nissan S platform cars, particularly the US domestic market Nissan 240SX. Visit my websitewww.240edge.com, which focuses on Nissan 240SX modifications, to get information about suspension setup, quality upgrades, and general 240SX tuning. Feel free to republish my articles, but please include a text link to my websitewww.240edge.com. |
Written by Laure
Classic Cars Online US
- The Studebaker Company: A Journey from Wagons to Wheels
- Revolutionizing the Road: Unveiling the 1932 Studebaker President and Commander
- The Art Deco Revolution: How 1930s Automotive Design Embraced Luxury and Modernity
- Unveiling the Pontiac Chieftain: A Journey Through Its Iconic Generations
- The Iconic 1960 Chevy Bel Air: Evolution, Design, and Enduring Legacy
- The Timeless Elegance of the 1960 Chevy Bel Air: Exploring its Interior and Exterior Features
- The Enduring Charm of the Chevy Bel Air: A Classic Evolution
- Exploring the Iconic 1962 Chevy Nova: Specs, Features, and Historical Significance
- The Evolution of Chevrolet Nova: Exploring Generations, History, and Impact
- The Evolution of the Chevy Nova